♦ Material All contact material parts adopt SUS316L
♦ Filling range: 100-1000ml (Adjustable)
♦ Filling speed: 20-40 bot/min
♦ Filling accuracy：≤1%
♦ Air pressure: 0.5-0.8MPa
♦ Working pressure: 0.2-0.5MPa
♦ Air Consumption: 0.05 m³
♦ Power Supply: 220V/380V, 50HZ/60HZ
♦ Total Power: 4.8KW
♦ Mixing Motor: 120W
♦ Mixing Speed: 0-60r/min
♦ Hopper: 40L
♦ Heating Power: 4.5KW
♦ Water Pump: 90W
♦ Size L*W*H: 660*560*1860mm
Fillers (or filling machines) are used for packaging, mainly for food/beverage but for other products as well. These are used to fill either a bottle or a pouch, depending on the product.There are several types of fillers used by the packaging industry.
►Auger/agitator flling machines: designed to fill dry mixes, such as flour and sugar. The fillers have a hopper shaped like a cone that holds the mix and puts it in a pouch using an auger conveyor that is controlled by the agitator. The mix is filled in a pouch that is made of paper or poly that is formed in a collar and the pouch gets sealed by a series of heaters and dies. The interface with the process supplying the powder is of prime importance to ensure an efficient filling.
►Flow filling machines: designed for liquids, oils, and thin food products. These fillers are designed when they fill a bottle or tub that enters the machine, the ejects the open bottle back onto another conveyor for sealing.
►Tablet fillers: These are designed for products that are counted by pieces instead of weight. These are designed for small bottles (similar to some of the flow fillers), but the hopper of the filler is set up to permit scan counting of tablets or candy pieces.
►Positive displacement pump fillers: positive displacement, pump filling machines easily handle a wide range of container sizes, fill volumes and product types. While originally designed for filling creams, gels and lotions these fillers also handle water thin and heavy paste products. Some of the products this machine easily fills are cosmetic creams, heavy sauces, thick shampoo and hair conditioners, honey, hair gels, paste cleaners, and car wax.
►Vertical form fill sealing machine
This filling machine can be used to fill various high and low viscosity liquid and cream material:
Cosmetic: Shower gel, shampoo, facial cream, etc. Food: Margarine, chocolate, honey, etc. Pharmacy: Injection, antibiotics, oral solution, ect.
Working principle&Equipment Introduction
Working priciple :
1)Through adjusting the digital display control panel to set the filling time and the interval time so that control the filling volume.
2)Can heating the material to the setting tempereture, electric heating.
3)Add the stirring paddle can mixing the meterail when heating.
4)Manual finishing the bottle loading, when pass the interval time, filling head automatic fill.
►The machine is pneumatic and controlled by foot ,easy to operate
►This machine has heating function by hot water system.
►Air consumption >0.2meter/minute ; Air pressure >0.4mpa
1. Pneumatic type, use air compressor.
2. Suit to fill liquid and high thick product. Such as water, shampoo, tooth paste, honey,butter etc.
3. Widely used in food and cosmetic factory. The speed is around 35 bottles/min. Also depend on worker working
4. Its own manual and auto function.The machine easy to take apart and clean.
5. It seal very good by sealing ring. wont cause material leakage.
6. Volumetic pump,so filling volume adjustable and controllable.
7. Also can add mixer and heating device on the machine according to different customer request.
8. Our engineer design different types for different filling range.It will fill more accurate and exact the right volume.
Application of vertical filling machine:
paste, cream, liquid (lotion, oil, juice, honey, ointment, liquid soap, etc)
Basic parameter of vertical cream filling machine
|♦ Material||All contact material parts adopt SUS316L|
|♦ Filling range||100-1000ml|
|♦ Filling speed||20-40 bot/min|
|♦ Filling accuracy||≤1%|
|♦ Air pressure||0.5-0.8MPa|
|♦ Working pressure||0.2-0.5MPa|
|♦ Air Consumption||0.05 m³|
|♦ Power Supply||220V/380V, 50HZ/60HZ|
|♦ Total Power||4.8KW|
|♦ Mixing Motor||120W|
|♦ Mixing Speed||0-60r/min|
|♦ Heating Power||4.5KW|
|♦ Water Pump||90W|
|♦ Size||L*W*H: 660*560*1860mm|
Details of Vertical heat mix filler equipment