Twin lanes irregular-shaped pouch sachet oil paste packaging equipment customized two lines packer

Basic parameter of packaging machine liquid bagging two lanes:

two lanes packaging machine
Suitable materials: Oil paste sauce liquid etc
Film volume: 5ML-50ML
Contact materials:SUS304
Packaging speed:45-50bpm
Sealing Way:Back Seal
Bag size:Width 25-210MM
Length:40-220mm
Sealing pattern:Net type,vertically plain
Roll of film diameter:280mm or less; Inner dia:3"
Horizontal sealing way:Cylinder heat sealing
Film dragging type: Servo-driven
Film:PE/PVC/PET/Paper;
Working power: 220V/Single phase/50HZ(North American standard customizable)
Air pressure:6kg,Air consumption:0.5-3m3 per minute
Dimension:860*820*1885mm
Weight: 450KG

Description

The irregular-shaped bag packaging liquid is specially designed for our customer who only offered us the size of film. We not only manufacture the machine for them,the film as well drawn by our engineer team according to the requirements from the Buyer.

The twin lanes packaging machine packs the liquid or oil or other fluid liquid into the shaped bags which are made of PE/PET/Paper materials film.

The feeding of material and cutting of the bag/pouch can be determined either by pouch length, or by indexing to an eyespot (photo registration mark), which is detected by a visual sensor. While single web systems are popular for food applications, the dual web four side seal system is often popular for IVD and Medical device products. Closely related is the horizontal form-fill-seal machine, which generally uses more floor space than a vertical system. Modern advancements in pouch forming technology have allowed for smaller and smaller Vertical pouch forming systems.

Many food filled packages are filled with nitrogen to extend shelf life. Food manufacturers are often looking for ways to improve their geographical reach or otherwise extending the shelf life of their product without the use of chemicals. Nitrogen filling is a natural means of extending shelf life. More and more manufacturers are choosing to create and control their own nitrogen supply by using an on demand nitrogen generators.

  • 01 ) MachineFrame
  • 02) H. Sealing
  • 03) Bag Cutting
  • 04) V. Sealing
  • 05) Filling part
  • 06) Molding part
  • 07) Film Supply
  • 10) Electric Part

Feature of liquid packing machine two lanes:

1. Automatic packing for all kinds of liquid,powder,granule materials.
2. Show packaging speed and number of packages,adjustable packing speed.
3. Microcomputer control selfenergy,so that more precise and accurate dispensing, fast, fully automated dispensing process.
4. We stock all spare parts for this machine.
5. Machine is made of US304 stainless steel, ensuring hygiene production
6. Famous brand Keyance sensor for high sensibility to detect the film
7. Servo-motor driving system to keep the machine running in a stable&lasting working

Basic confirmation for Two lanes packing machine liquid bagging equipment:

Omron Touch screen 7"+ Panasonic PLC+Servo motor Delta
AIRTAC Pneumatic part
4lanes PID Temperature controller(Vertical sealing/horizontal sealing 2lanes each)
Solid Relay:Omron
Cutting way motor-driven
Sensor:Keyance; Bag length adjustable by changing parameter in Touch screen
Frame: Stainless steel
Safe door

Easy-worn parts & Spare parts for twin lanes packaging machine:

ADJUSTMENTS

►Horizontal sealing adjustment

(1)Make sure that the seal fittings are set as shown in Figure (a).
(2) Adjust the seal fittings as follows if they are positioned as shown in Figure (b) or (c):
1. Turn off the gas main switch, close to the left and right heat sealing device, and loosen the heat sealing fastening screw (M6).。
2. Loosen the fastening screws and then reduce the pressure on the fastening. This time the heat sealing device can be moved.Seal the left and right heat sealing devices together. In the left and right sides of the heat sealing device, the two sides of the normal, slow closing the horizontal sealing mechanism, and lock the fastening screws.

Readjustment and verification for sealing condition
(Check the sealing condition to make sure the adhesion and form are both correct.)
(1) adhesion
The most important factors for the adhesion are the adjustments for the temperature and the seal pressure. If both of these adjustments are correct, the locations other than the polyester are separated when it is peeled.
(2) Refer to the section “3.2 temperature controller (PID)” for a description of the temperature setting procedures.

In general, the strength of the adhesion increases if the sealing time and pressure is increased.

►Photoelectric eye adjustment:
1.Detection of position adjustment 1 photoelectric switch, to ensure that the light electric eye detection point to the heat sealing device for transverse sealing intermediate integer bag length, i.e. optical sighting electric eye color, then the heat sealing device is sealed in the sealing mark color.
2. Lens of the photocell is in a distance of about 3mm to the packing film. When the film is being fed the photo spot must detect a registration mark. After the photocell has detected a registration mark, the photocell’s function indicator should show a change such that if the checked mark is in light color, the indicator will not turn on. The indicator only turns on when a dark color is checked up. Otherwise, the sensitivity knob has to be readjusted. If the base color is in a little difference with the registration mark, the sensitivity of the photocell should be readjusted once more in order to avoid erroneous action.

3.Adjustment on the sensitivity: When the packing material has been put in the right place, slide the film through the film guide plate at the photocell, make the packing material align with the registration mark area, switch the MODE key on the fiber amplifier to SET status, and press ON key, when put the fiber head on the non- registration mark area, then press the OFF key, at last, press the MODE key to return to the original status. At this time, slid the packing material, when light source casts on the non-color-mark area, the red indicator won’t be on; When the light source casts on the non-color-mark area, the red indicator will on, if not, please readjust!

Final Product picture bag sample:

Wooden case packaging for two lanes packing machine:

Share