Liquid pouching equipment for slanted sealing type bags

Basic parameters of the slanted type sealing at both sides of bags packing machine:

Capacity(bag/min): 1020 pcs per min
Range of measurement(ml): 200-2000g sauce sachet
Bag size(mm): (L)50-350 , (W)50-200
Power(W): 1100
Source voltage: 380V/50Hz 220V/50~60Hz
Packing material: PET/PE,PET/AL foil/PE,PET/PE,NYLON/PE, etc.
Net weight(kg): 600kg
Overall dimensions: 625*1200*2250mm(L*W*H)

Description

Sauce Paste Automatic Filling Packaging Machine Unit is specially set up for package of product with medium to high viscosity, such as tomato sauce, honey, soya sauce, tomato paste, marinara sauce, liquid waterproof coating, washing detergent, cooking oil, jam, ketchup, butter, peanut paste, sala sauce, chili sauce, mayonnaise, hand soap, semi-fluid products,

The machine can make pillow type bags, the metering range is 20-500g and 200-1000g, the maximum speed can reach 25bags/min.

Basic parameters of the slanted type sealing at both sides of bags packing machine:

Capacity(bag/min): 10-25 pcs per min
Range of measurement(ml): 200-2000g sauce sachet
Bag size(mm): (L)50-350 , (W)50-200
Power(W): 1100
Source voltage: 380V/50Hz 220V/50~60Hz
Packing material :PET/PE,PET/AL foil/PE,PET/PE,NYLON/PE, etc.
Net weight(kg): 600kg
Overall dimensions: 625*1200*2250mm(L*W*H)

Machine Configuration:

Item Type of brand
PLC: Mitsubish(Japan)
Mitsubish(Japan) Xinjie(China)
Photoelectric tester: Longyou(China)

Motor Motor
Air cylinder AirTAC
Material Material contact part--304 Stainless Steel / bodyshell-201 stainless steel.

Machine integrated with mixing tank and related pipes connection

Technical characteristics of liquid packing machine lotion cream hair gel:

  • 1. English and Chinese screen display ,operation is simple .
  • 2. PLC computer system , function is more stable , adjustment any parameters not need stop machine.
  • 3. It can stock ten dispose , simple to change variety.
  • 4. Sever motor drawing film , position accurately.
  • 5. Temperature independent control system ,precision get to±1℃.
  • 6. Horizontal , vertical temperature control ,suitable for various of mix film , PE film packing material.
  • 7. Packing type diversification , pillow sealing, standing type ,punching etc.
  • 8. Bag–making , sealing, packing, print date in one operation.Work circumstance quiet, low noise.
  • 9. Air expelled before bagging;

Fished bags samples

Common faults, reasons and elimination

TroubleReasonShooting way
Touch the key of ON, but the machine does not work1.check if emergency stop switch is restored2.transducer and servo controller display RC1.restore emergency stop switch

2.turn off main power supply, turn it on after 20 seconds

creep-age switch trips

creepage switch tripscreepage of heating sheet and other electrical appliancescheck electric appliances one by one, eliminate
sealing roll not hot1.protector of open circuit trips

2.heating sheet burnt out

3.temperature control meter damaged

1.check and eliminate open circuit, recover it

2.replace heating sheet

3.replace temperature control meter

Number on temperature control meter bounces repeatedlyThermcouple loose or damagedFix or replace thermocouple
temperature is normal when close down, but descends continuously when running1.environmental voltage is low, causing descending of power of heating sheet

2.power of heating sheet is too low

1.reduce packing speed or add voltage stabilizing device

2.replace it with heating sheet of bigger power

air leak at sealed mouth of packing bag1.temperature is insufficient

2.pressure is insufficient

3.sealing time is too short

4.irregular front and back horizontal sealing rolls

5.material clamped

1.properly increase temperature

2.check if total pressure is 6.5 kilograms

3.properly increase sealing time parameter

4.carefully adjust parallel status of mouth of horizontal sealing roll

5.adjust baiting time or inflation delay

cutting position or cut into half a bag can not be controlled1.side of packaging film cockles or photoelectric wrong action caused by poor quality of light path

2.sensitivity of photoelectric head isn’t  adjusted well

3.bag set length is insufficient and different lengths caused

1.replace packing film2.re-adjust photoelectric sensitivity

3.increase bag length

conveyance film does not drop1.pressure of conveyance film cylinder is insufficient or too much

2.belt slides of damaged

3.static of packing film is too big

1.check if pressure of conveyance film is 2.5 kilograms

2.scrape surface of belt with saw sheet or replace it

3.replace packing film

After-sale service for packaging machine slanted type sealing packing machine

Spare parts list

horizontal sealing heater 4 set

vertical sealing heater 1set

interior hexagonal spanner 4-10mm 1 set

copper brush 120mm 1 piece

cutter 220mm 1set

oil kettle 150ml 1 piece

character grain 1 box

 

Share